3 POINT SEAT BELTS WILL MAKE YOU TRUCK MUCH SAFER BUT YOU HAVE TO MAKE SURE THE INSTALLATION IS DONE PROPERLY
THIS STEP BY STEP WILL APPLY TO MANY EARLY PICK-UPS. YOU CAN GET AN IDEA ON WHAT IT WILL TAKE TO MAKE YOUR TRUCK SAFER.
JULIANO 3 POINT SEAT BELT FOR BENCH SEAT INCLUEDS ALL THE HARDWARE.
START BY DRY FITTING THE SEAT BELT TO DETERMINE A GOOD LOCATION FOR THE"B" PILLAR MOUNTING PLATE. THIS LOCATION SHOULD BE EVEN OR ABOVE YOUR SHOULDER, NEVER BELOW YOUR SHOULDER.
DRILL A 1/2 HOLE FOR THE "B" PILLAR MOUNTING PLATE.
TAPE THE "B"PILLAR BRACKET TO A YARD STICK
SLIDE UP BEHIND STEEL INNER PANEL.
DRILL HOLES FOR SMALL RIVETS.
RIVET "B" PILLER PLATE IN PLACE BEHIND STEEL INTERIOR PANEL.
BOLT SEAT BELT IN PLACE
INSTALL BOLT COVER.
MARK LOCATION FOR RETRACTOR AND DRILL 1/2 HOLE
DRILL 1/2 HOLE TO MOUNT "L" BRACKET FOR RETRACTOR.
THE OTHER END OF THE BELT SHARES THE SAME BOLT THAT HOLDS THE RETRACTOR TO THE
THE RETRACTOR IS TOTALLY INSTALLED AND NOW WE GO TO THE BUCKLE SIDE.
DRILL 1/2 HOLE TO BOLT THE BUCKLE END THRU THE FLOOR.
BOLT BUCKLE END THRU FLOOR USING SUPPLIED ANCHOR PLATE ON BACK SIDE OF FLOOR.
INSTALL SEAT AND YOU ARE READY TO GO
DRIVE SAFELY, BUCKLE UP!!!
JULIANO 3 POINT UNIVERSAL SEAT BELT IN 80'S MUSTANG
REMOVE OLD SEAT BELT
- SEAT BELT KIT WITH SPECIAL ADAPTOR BRACKET
NEW BRACKET INSTALLED
JULIANO RETRACTOR TO BRACKET
BOLT THE OTHER END OF THE RETRACTOR BELT TO THE ORIGINAL FLOOR MOUNT
RETRACTOR PART COMPLETLY INSTALLED
BOLT IN THE BUCKLE END AND YOU ARE GOOD TO GO
BE SAFE AND BUCKLE UP !!!!!
36 CHEVY COUPE 3 POINT SEAT BELT INSTALATION. ALL EARLY CHEVYS HAVE A WOOD STRUCTURE WHICH MAKES IT DIFFICULT TO INSTALL 3 POINT SEAT BELTS THAT WILL HOLD UP IN CASE OF A COLLISION. HERE ARE SOME IDEAS TO MAKE YOUR INSTALL SAFE.HERE ARE SOME BRACKETS WE MADE UP USING OUR STANDARD "L" BRACKET AND SOME 1X1 SQUARE TUBING. HERE ARE SOME BRACKETS WE MADE UP USING OUR STANDARD
THE BRACKET IS NOW BOLTED TO THE STEEL PARTS OF THE BODY TO SUPPORT THE RETRACTOR THAT WILL BE MOUNTED TO THE PACKAGE TRAY.
BOLTING THE RETRACTOR THRU THE PACKET TRAY AND METAL SUPPORT BRACKET.BOLT THE OTHER END OF THE RETRACTOR BELT THRU THE FLOOR USING OUR ANCHOR PLATE ON THE UNDER SIDE OF THE FLOOR
BOLT THE OTHER END OF THE RETRACTOR BELT TO THE FLOOR USING OUR ANCHOR PLATE ON THE UNDERSIDE OF THE FLOOR
BOLT THE HARD ARM BUCKLE SIDE OF THE BELT TO THE FLOOR WITH
BE SAFE AND ENJOY. BUCKLE UP!!!!
