Bob's Hot Rods» New Products

POR 15

Bob — Fri, 30 Jan 2009 14:52:24 +0000

We have used POR 15 in our shop for several years and were excided to announce that we are now an autorized distributor of all POR 15 products. POR 15 is not just about their popular rust preventing paints. They have several products that we didn’t even know about such as;

POWER-R-LINER—————————TRUCK BED LINER

HARDNOSE——————————-TOP COATS

FLEXCOTE——————————–MARINE PAINT

OUR 60 FORD FRAME

METAL MASK——————————BARE CAST LOOK

GLISTEN PC——————————-POLISHED METAL COATING

POR 20———————————–HIGH HEAT PAINT

ENGINE ENAMEL—————————ENGINE PAINT

AND MUCH MORE

INSTALLING 9 INCH SEAL BEAM IN 32 FORD

Bob — Tue, 13 Jan 2009 17:32:05 +0000

REPLACING THE HALOGEN REFLECTOR KIT SO YOU CAN SEE AT NIGHT

: REMOVE ORIGINAL LENS AND RING.

: CLIP SEAL BEAM INTO TRIM RING USING NEW WIRE CLIPS SUPPLIED WITH BULBS

: PLUG WIRES INTO EXISTING BULB SOCKET AND SNAP TRIM RING AND BULB TO BUCKET

: THE FINISHED LOOK

INSTALLING PARKING/DIRECTIONAL LIGHT 35-36 FOR HEADLIGHT

Bob — Tue, 13 Jan 2009 17:14:47 +0000

MARK CENTER LINE OF BUCKET

: TRACE LIGHT HOUSING HOLDING THE HOUSING 1/4 FROM FRONT OF BUCKET

: MARK SCREW HOLE 2 1/4 INCHES BACK FROM TAB

: DRILL BOTH HOLES ON MARKS

: INSTALL RUBBER GROMET IN WIRE HOLE

: INSTALL LIGHT WITH SUPPLIED SCREW

: THIS IS THE FINISHED LOOK

35-36 FORD AEROBRITE HEADLIGHT SYSTEM ALSO FITS 35 -39 FORD PICK-UP

Bob — Wed, 10 Dec 2008 16:30:50 +0000

STANDARD AEROBRITE WITH HELLA HIGH PERFORMANCE BULB

AEROBRITE WITH H.I.D. BULB

JUST COMPLETED AND NOW AVAILABLE IS OUR NEW AEROBRITE HEADLIGHT KIT FOR 35-36 FORD PASSENGER AND 35-39 FORD PICK-UP. THIS WILL JOIN OUR OTHER AEROBRITE KITS FOR 37-38 AND 39 STANDARD, 39 DELUXE AND 40 FORD. ALL OF OUR AEROBRITE KITS WILL GREATLY IMPROVE YOUR NIGHT VISION AND MAKE YOUR HOT ROD SAFER AND MORE ENJOYABLE TO DRIVE AT NIGHT. ALSO AVAILABLE WIT H.I.D. BULBS

PRO CLAMP EXHAUST COUPLER

Bob — Wed, 15 Oct 2008 18:52:46 +0000

Exploded view of clamp Call 1 800 300 1932 for more info

: call 1 800 300 1932 for more info

call 1 800 300 1932 for more info

: STAINLESS PRO CLAMP

We have been working hard on a new catalog which is taking more time then we had planned. I will take this opportunity to share some of our new stuff. The PRO CLAMP is a new exciting idea for coupling your exhaust together. The clamp needs to be welded on to your pipe or muffler but once that is done you can remove the couplings by removing the nut with a spanner wrench. Works great and looks even greater.

Order Now