HOW TO INSTALL 35-36 FORD AEROBRITE

THIS IS WHAT COMES IN THE KIT.  2)HELLA BULBD, 2) ADAPTOR RINGS, 2) CUSTOM STAINLESS TRIM RINGS, 1) COMPLETE HARDWARE KIT.

THIS IS WHAT COMES IN THE KIT. 2)HELLA BULBS, 2) ADAPTOR RINGS, 2) CUSTOM STAINLESS TRIM RINGS, 1) COMPLETE HARDWARE KIT.

PLACE TAPE ON BUCKET FOR EASE OF MARKING
PLACE TAPE ON BUCKET FOR EASE OF MARKING
MARK HOLES MAKING SURE THE TOP OF THE ADAPTOR RING IS TOP DEAD CENTER
MARK HOLES MAKING SURE THE TOP OF THE ADAPTOR RING IS TOP DEAD CENTER
CENTER PUNCH HOLES
CENTER PUNCH HOLES
DRILL HOLES
DRILL HOLES
ATTACH ADAPTOR RING WITH SUPPLIED HARDWARE. (if the bulb is loose after the trim ring is installed you will have to shim the adaptor ring with shims that are in hardware kit)
ATTACH ADAPTOR RING WITH SUPPLIED HARDWARE. (if the bulb is loose after the trim ring is installed you will have to shim the adaptor ring with shims that are in hardware kit)
INSTALL HELLA BULB INTO ADAPTOR RING
INSTALL HELLA BULB INTO ADAPTOR RING
INSTALL TRIM RING AND CHECK TO SEE IF BULB IS TIGHT. (you may have to shim adaptor ring with supplied shims)
INSTALL TRIM RING AND CHECK TO SEE IF BULB IS TIGHT. (you may have to shim adaptor ring with supplied shims)
THE FINISHED LOOK
THE FINISHED LOOK