JULIANO’S PRO-CLAMP EXPLODED VIEW.
3) PIECE CLAMP 1)MALE FLANGE 1)FEMALE FLANGE 1)ROUND NUT
BE SURE TO WELD A LITTLE AT A TIME AND ALLOW TO COOL IN BETWEEN WELDS. TAKE CARE SO YOU DON'T WARP THE SEATING SURFACE. TAKE THE SAME CARE WHEN WELDING THE MALE SIDE AND MAKE SURE YOU PUT THE NUT ON BEFORE YOU WELD
TAKE THE SAME CARE WHEN WELDING THE MALE END AND BE SURE TO PLACE THE NUT ON THE PIPE FIRST
APPLY A BEAD OF PERMATEX ULTRA COPPER HIGH TEMP SILICON TO ONE SIDE
APPLY ANTI-SEIZE TO THE THREADS BEFORE FINAL ASSEMBLY
NOW TIGHTEN THE SET SCREW IN THE FACE OF THE CLAMP.BE SURE TO LET THE SILICON DRY FOR 24 HOURS BEFORE STARTING MOTOR
SPANNER WRENCH $12.00 SOLD SEPARATELY
PERMATEX ULTRA COPPER HIGH TEMP SILICONE AVAILABLE FOR $8.00